52 ISSN 2477-9105 Número 29 Vol.1 (2023) DOI: https://doi.org/10.47187/perf.v1i29.206 Instuto Superior Tecnológico Tsachila, Mecánica Industrial, Santo Domingo, Ecuador. La fabricación de bloques con Polieleno de Tereſtalato reciclado para la construcción de mampostería no portante, pretende determinar las caracteríscas sicas y mecánicas del plásco para incluirlos en la mezcla con materiales tradicionales como son el cemento, agua y arena. Se elaboró bloques con dimensiones comerciales en la provincia de Santo Domingo de 40 x 20 x 10 cm con adición de plásco Polieleno de Tereſtalato al 20, 40, 60 y 80 por ciento en sustución del material pétreo grueso. Se realizaron ensayos de compresión y flexión para determinar las propiedades mecánicas de las probetas y compararlas con las caracteríscas especificadas en la Norma Ecuatoriana de la Construcción y la norma NTE INEN 3066 que determinan los requisitos y métodos de ensayo para bloques de hormigón, también se determinó la inflamabilidad con la muestra al 40 por ciento de plásco reciclado basado en la norma BS EN ISO 11925-2:2010 y por úlmo, se encontró la conducvidad térmica del material compuesto, fundamentado en el estándar ISO 8302. Palabras Clave: caracterización, bloques, propiedades sicas, propiedades mecánicas. Blocks manufacture with recycled Polyethylene Terephthalate, for the construcon of non-bearing masonry, aims to determine the physical and mechanical characteriscs of the plasc to include them in the mixture with tradional materials such as cement, water and sand. Blocks based on commercial specificaons of 40 x 20 x 6 cm with the addion of Polyethylene Terephthalate plasc at 20, 40, 60 and 80% to replace the thick stone material are made in the province of Santo Domingo. Compression and bending tests are carried out to determine the mechanical properes of the specimens and compare them with the characteriscs specified in the Ecuadorian Construcon Standard and the NTE INEN 3066 standard that determine the requirements and test methods for concrete blocks. It is also determined the flammability with the sample at 40 percent recycled plasc based on the BS EN ISO 11925-2: 2010 standard. Finally, the thermal conducvity of the composite material based on the ISO 8302 standard is determined. Keywords: characterizaon, blocks, physical properes, mechanical properes. *luisnunez@tsachila.edu.ec ELABORACIÓN Y CARACTERIZACIÓN DE UN MATERIAL COMPUESTO CON POLIETILENO DE TEREFTALATO PARA LA FABRICACIÓN DE BLOQUES RESUMEN ABSTRACT Development and characterizaon of a polyethylene terephthalate composite material for blocks manufacture. Paúl Núñez Naranjo* Franco Palacios Pérez Edwin Taranto González Sanago Armijos Mena iD iD iD iD http://ceaa.espoch.edu.ec:8080/revista.perfiles/ ISSN 2477-9105 Número 29 Vol.1 (2023) DOI: https://doi.org/10.47187/perf.v1i29.206 Fecha de recepción: 22-04-2022 Fecha de aceptación: 02-08-2022 Fecha de publicación: 04-04-2023